Roofing Companies

Roofing Website Hosting

By the way, if you’re looking for roofers in Dublin, check out Ace Roofing – they sponsor this blog!
Word Count: 510
510 1.3

Roofing Companies

If you’re seriously thinking about renovating or repairing your rooftop, or still in the construction stage, then it’s highly important for you to hoard some relevant articles on selecting dependable roofing companies. You roof contractors should be chosen conscientiously. You should not greatly rely on the claims many companies make in their publicity stunts because most of them are just cheap talk.

Before any hasty decisions, you have to know all the tough roofing company players the market today. Be ready to expect countless competitive proposals and bids. However, it would be advisable to go for the fairly new roofing companies since they usually charge a lot cheaper and provide some special offers.
It is also a very good idea to avoid roofing companies that do not offer reasonable warranties. Most of the time, long warranties would equal to higher price, but you have to keep in mind the considerable amount of money you will probably save by choosing quality service. When your roof starts to fail, you would certainly be grateful to have gone an extra mile.
Most roofing companies have their own area of expertise. Choose the company that has a considerable amount of experience with the type of material you want for your roof. Never solely rely on advertising propagandas; it’s usually more dependable to look into their portfolios. This is the excellent tool that you have at your disposal in properly assessing a contractor’s expertise. Roofing companies that offer a longer warranty is usually a reliable indicator.
The cost is of course is should also be one of your primary concern. There are usually two types of services roofing companies offer: one with the fee where the contractors supply the building materials or the one where you will have to provide the materials needed for the construction. The former would be much preferable since it more or less presents you an accurate estimate of the total cost of the project. The latter is also favorable since you will be able to handpick the roofing materials that you personally like. Communicating with your roofing contractor is very important so you will not be caught by surprise by all the incurred expenses. You should be knowledgeable with the costs of roofs since there are certainly some types that are more expensive. A prior research would greatly prove to be very valuable in the long run.
You should also take into consideration the time frame required to finish the roofing project. Never agree to pay your contractor in terms of the time it took to build the roof. They would predictably drag it to a longer span of time to acquire a higher pay. It is absolutely best to get a flat fee, and you will be rest assured the contractor would finish the building right on schedule or even earlier.
As a final point, when searching for a roofing contractor, it is sensible to compare notes with your friends. They will probably give you valuable advises that can save you a lot of time and resources.

Marketing Effectively to More Than One Audience

Marketing With Funnels

Word Count:
323

If you want to find out what Clickfunnels is and how it works, click here!
What’s a small business owner to do if they have more than one audience to market to? Perhaps they need to attract clients but they also need to recruit business partners or vendors. Do they need two marketing plans or can they use one plan?

marketing, marketing plan, how to market, target audience, customers

What’s a small business owner to do if they have more than one audience to market to? Perhaps they need to attract clients but they also need to recruit business partners or vendors. Do they need two marketing plans or can they use one plan that tries to address both aspects?

This is a great question that applies to many different types of businesses who find they need to market to more than one group of people. You only need one marketing plan. However, you will have two different target audiences within that plan and you’ll need to have a marketing strategy for EACH of these audiences.

The reason you’ll need separate strategies and marketing activities to go with those strategies is because you will be talking to two very different audiences. And it will be important for you to speak and market to them based on what is important to them.

A message that works with one group may not hit home with the other. This will in large part depend on how similar or different these groups of people are. Your first task is to learn as much as you possibly can about each group. What problems do they each have that you can solve?

Make sure you can answer the following 10 questions about both groups of people:

1. Who are they?

2. Where do they live … work … play?

3. What problem do they have that you can solve?

4. How does your product or service fit into their life?

5. What else do they buy in your product or service category?

6. Where do they get information regarding your product/service?

7. What is most important to them?

8. What are they most afraid of?

9. What is their emotional connection to your product/service?

10. How will they rationalize purchasing your product/service?

If you can answer these questions you’ll be ready to create marketing strategies to successfully win over each group.

(C) 2005 Debbie LaChusa

How Caulks And Sealants Are Used In The Modern-Day Construction Industry

DIY Tips

Word Count:
1170


A trip to your local home improvement store can be an overwhelming experience for the average person, especially if you’re trying to figure out which caulks and sealants to use for your exterior home improvement project. Unlike the interior, the exterior faces high UV exposure, extreme temperatures and the need to be 100% waterproof. Once you have finished reading this article, you will better understand the nature of caulks and sealants and how to select the best products for your project.

Guest post today from Active Paving – providers of patios Dublin for many years.

sealant, sealants, caulk, caulks, high performance sealant, high performance sealants, adhesive sealants, high performance caulk, expansion joint,

A trip to your local home improvement store can be an overwhelming experience for the average person, especially if you’re trying to figure out which caulks and sealants to use for your exterior home improvement project. Unlike the interior, the exterior faces high UV exposure, extreme temperatures and the requirement to stay 100% waterproof.

When you’re dealing with silicone caulks, you have a non-paintable surface, with poor UV performance. Although water based and latex caulks have good paintability, they also have high shrinkage, poor elasticity and poor UV performance. Synthetic-rubber (polyurethane) sealants and tri-polymer sealants (silyl terminated polyether sealants) can do it all: paintable, great moisture sealing, no or low shrinkage, and very good UV resistance. Many are also pre-tinted in popular colors. These include the popular NP1 (polyurethane sealant), Sonolastic 150 VLM, and Novalink sealants.

All of these sealant and caulk materials are heavily advertised and marketed with super flashy packaging, labels and all kinds of fancy logos. If you’re looking for a high performance caulk or high performance sealant, you can literally be confronted with hundreds of brands and companies that claim to have the best product for your needs. So what can you do, when you are bombarded with all kinds of choices?

Each brand of caulk generally has its own special and unique qualities. Although, it is in your best interest to read all of the labels and also follow the company specifications, for the use of the caulk and sealant, the very thing you want to know may not be found on the labels of the containers at all! Many of the best products are architectural / commercial grade and not generally available to the public.

Sealant was originated through the needs for exterior finishing in the home building industry. Caulk was originally a term that was used to describe the sealant material used to build boats. Many companies and manufacturers these days are using caulk as an all-purpose word to describe paintable interior grade products. Sealants by definition have at least /-25% elongation capability over a long-term period and are UV resistant. Advanced sealants are 100% solids and offer up to 100% elongation.

Most of the general public use caulk and sealant interchangeably to serve the same basic purpose, which is to fill gaps between building materials and to shield materials from air and water.

Although sealants and caulk work the same basic manner, they both also fail for the same basic reasons. There are three major types of caulk failures that you will encounter. These are substrate, cohesive, and adhesive. The bond that is put between the substrate and the caulk can actually fail, making the caulk tear and break down. Caulked joint problems are also very common and are usually due to the substrate not being effectively prepared or using the wrong product all together.

So, before you choose a certain kind of product, you want to really think about how you will be using it and for what purpose. You will also want to consider the area or location you are going to apply the caulk or sealant.

For example, if your intent is to seal the area around the base of a toilet, sink, bathtub or shower, it will be imperative that you purchase a product that both mildew-resistant and durable enough to survive scrubbing and chemical cleaning. If your intent is going to be to use sealant or caulk between wood clapboards and vinyl windows, then you’ll need to purchase a product that is able to bond very well to both types of materials and is weather resistant.

You will also want to keep humidity, temperature and moisture in mind when you are shopping for caulk or sealant. Water-based caulks not recommended for outdoor projects, because these products do not withstand the hot-to-cold and cold-to-hot weather changes, as well as other harsh weather situations. If you are living in an area that is below 50F during the time you need to apply sealant, then you’ll probably want to use a silicone sealant, instead of polyurethanes, because polyurethanes are very difficult to apply in chilly conditions.

Other Applications: For sealing skylights, glass domes, greenhouses and such, Sonolastic Clear 25 is a popular product. For Kynar or siliconized paint finished metal roofs, a special sealant formulated to seal to these surfaces is a must. Products such as Duralink are popular. For repair of swimming pool tile grout lines, polyurethane sealants are excellent. Products like Ultra provide a very durable seal, which can survive in areas where grouts fail quickly. Ultra is also used as a pickproof sealant in security applications.

To the delight of many, who prefer the do-it-yourself project, certain caulks and sealants can be color-matched to paints, tiles, grout, wallpaper and even carpeting. The beauty of these products is that they can be color-matched while they are still in the product tube. NP1 is also available in many popular pre-formulated colors. Any good home building products store will be able to help you color-match your caulk and sealant to your desired color. Once the caulk has cured, then it will precisely match the color you were seeking to acquire.

In summary, let’s review your options again:

1. Water-based caulks are the easiest to work with. They have a smooth, thin and consistent flow, and they are easy to apply with almost any tool. These products cure quickly, have very little odor, and the clean up is easy with water.

2. Silicone caulks and sealants are good for interior or exterior areas, which will not be painted and are good for areas that will be exposed to extremely cold weather, certain metals, and glass. Silicone materials do not repair well (nothing wants to stick to cured silicone material, not even more silicone)

3. Synthetic rubber sealant is best used for areas with high movement and dissimilar materials. These materials can be painted and are designed for long-term exterior exposure. There is also less chance that the synthetic rubber bond will break during movement. Common applications are roof tile repairs, roof moldings, and roof to wall sealing, window frame sealants, and doorsill sealant.

4. Self Leveling Expansion Joint Sealant, such as SL1 and SL2, are used to fill and seal the expansion joint gaps in concrete and driveways.

5. Tri-Polyimer sealants, such as Sonolastic 150VLM are the next generation. Although somewhat more expensive, they offer superior exterior performance.

6. New Hybrid products are available that defy all classifications. Using these kinds of sealants can yield a lot of surprises, so be sure to read the instructions carefully. Some of these products tend to expand upon drying, so it is best to test them out in an inconspicuous location before actually using them on your project.

Print this article and take it with you when you are shopping for caulk and sealant. Review it and then follow any instructions on the containers of the products you buy. It is our hope that this quick tutorial will help provide some clarity on exactly what products you should buy for your home improvement or home construction project.

Roofing Cleaning Products

Roofing Website Hosting

By the way, if you’re looking for roofers in Dublin, check out Ace Roofing – they sponsor this blog!
Word Count: 445
445 x 100= 1.0

Roofing Cleaning Products

You just had your new roofing system installed and you felt so exhilarated. Or so you thought, because little did you know dirt and mildew are slowly accumulating, stains are showing too. This may warn you well that your roof needs cleaning the soonest possible time. Soap and water would be the cheapest resort but does not guarantee a total clean up. A quick info on roofing cleaning products would be helpful.

Roof Reviver is a cleaning agent that does not contain strong chemicals that can be damaging to your roof. In fact it is designed to protect your roof from further damage. Renowned shingle manufacturers, because of its proven efficacy, recommend it.

If you have rubber roofing, you will need a cleaning product that is specially designed for synthetic materials without destroying it. Dicor has a wide variety of roofing cleaning product line that is specially intended for roofing made of rubber material. One of which is Roof-Gard Rubber Roof Protectant, which can clean away oil-based dirt and grime while maintaining the moisture and the color of your rubber roof.

If you want a roofing cleaning products that are free from harmful ingredients, you can try Roof-Be-Clean. This cleaning agent focuses on protecting your roof from the damaging elements in the environment like weather. It takes away roof stains while preserving its luster and color. It is also made of environment-friendly components.

Stains, if not washed immediately can eventually rotten the roof. In order to prevent costly damaged to your roof you need a roof stain-protector. Zincshield can take away the stain off your roof. It also inhibits the growth of stain-forming contaminants. With this, you are assured that your roof is stain-free for a longer period of time. The earlier you treat the stain out from your roof the greater is your saving from future roof-restoration expenditures.

You can also try Dur-A-Shield cleaning products like their coatings, which are made to handle all the roof-destroying factors. It works well on any surfaces and materials. The coating is made to last under any harsh temperature. The color of your roof will not be damaged and the surfaces are not chipped off. In short, this product is roof- friendly and environmentally safe.

There are actually many approaches in dealing with a stained and grimed roof. If you are not up to replacing it with new one, then cleaning it up is the best thing to do. Using the right roofing cleaning products that are just right for your roof and just the right for your health might just be the key to restoring and preserving one of your priced possessions- your roof.

How Bad Is The Air In Your House?

DIY Tips

Word Count:
653


The Journal of the American Medical Association now suggests that the air pollution existing today in the US raises the risk of lung disease to a point where more than half of the US population is breathing unhealthy amounts of air pollution . More than 50 million Americans seem to be suffering from allergies and more than 20 million battle asthma. There is such a thing as Sick Building Syndrome, a worldwide phenomenon, when chemical substances used in office construction such as glue, insulating materials, cardboard, and fiberglass are steadily released into the atmosphere from electronic equipment, carpeting, furniture and fittings. That is why the air inside buildings or residential structures may be many times more polluted than the air outside, according to the EPA.

Guest post today from Active Paving – providers of patios Dublin for many years.

air purifier, ozone air cleaner,pollution

Air Purifiers are all the rage now, everybody has them and everybody sells them.

There are Ionic Air Purifiers, regular filter Purifiers and HEPA filter purifiers.

The Journal of the American Medical Association now suggests that the air pollution existing today in the US raises the risk of lung disease to a point where more than half of the US population is breathing unhealthy amounts of air pollution . More than 50 million Americans seem to be suffering from allergies and more than 20 million battle asthma. There is such a thing as Sick Building Syndrome, a worldwide phenomenon, when chemical substances used in office construction such as glue, insulating materials, cardboard, and fiberglass are steadily released into the atmosphere from electronic equipment, carpeting, furniture and fittings. That is why the air inside buildings or residential structures may be many times more polluted than the air outside, according to the EPA.

Because of all these reasons Air Purifiers have become very important. The different types of air purifiers include mechanical purifiers, electronic air purifying systems, hybrid purifiers and gas phase purifiers. Most of these systems remove particles and harmful toxins from the indoor air.

The HEPA Filter is a High Efficiency Particulate Arrested Filter designed to remove 99.97% of all airborne pollutants 0.3 microns or larger from the air that passes through the filter ( including tobacco smoke, household dust and pollen).

There are also filtering technologies that operate by using ozonation. The most popular air purifier on the market today uses ozone. These purifiers actually produce ozone which is an irritant that can worsen asthma and decrease lung function.

The removal of particles from the air is what is measured when the efficiency rate is trying to be achieved. The fraction of particles that is removed from the indoor air being measured is what determines the amount of efficiency an air purifier possesses.

Air cleaners using mechanical filters or electronic technology can perform particle removal. Mechanical home air purifiers are units that can draw the indoor air through a metal or fibrous filter that is designed to trap the particles.

Because filters have different size pores they are able to catch these particles. is able to catch these particles with its different sized pores. Different types of filters may be pleated , square, round, with different levels of efficiency.

Mechanical filters in general are very efficient in eliminating contaminants from the air as long as they are cleaned regularly. There are 3 diferent types of electronic purifiers:

Electrostatic purifiers pull air into a chamber and charge the particles electrically. The air is then let through wafers which are negative ion generators, give particles a charge and cause them to stick to the nearest solid object.These purifiers are not as effective as the other electronic or mechanical purifiers because they do not eliminate particles but move them to another location.

Ionizers do the same thing but create ozone which in itself may be bad for your health. Ozone is a lung irritant produced by ion generators and some other electronic air cleaners and ozone generators. While indirect ozone production is of concern, there is even greater concern with the direct, and purposeful introduction of a lung irritant into indoor air. There is no difference, despite some marketers’ claims, between ozone in smog outdoors and ozone produced by these devices. Repeated exposure to ozone pollution may cause permanent damage to the lungs.

Hybrid air cleaners use both mechanical filters and electronic technology in order to clean the air of particles. Ozone emissions may be present from the use of electrostatic air purifiers and negative ion generators. High levels of ozone may be harmful but cleaning the units as specified by the manufacturer may mitigate the possible bad effects of ozone to some extent.

Efficient Air Purifiers can cost anywhere from $500 to $1500 for a single room and a System to clean a whole house can easily run into the thousands of dollars.

Marketing Comapny Info And Suggestions

Marketing With Funnels

Word Count:
1033

If you want to find out what Clickfunnels is and how it works, click here!
If you’re still managing your marketing promotion campaigns in-house, you should consider outsourcing to a promotional advertising and marketing firm that offers a complete variety of support service.

marketing company, marketing services, marketing fulfillment, promotional marketing, promotional campaigns, marketing companies

Marketing online and offline couldn’t be more complex and competitive than it is today. Markets have fragmented and advertising mediums have splintered into hundreds of specialized niches, all requiring specialized expertise in order to achieve respectable results. Marketing channels too, are splintered and controlled by conglomerates. It’s a realm that is often beyond the average marketers view let alone their ability to control it.

Promotional marketing is generally seen as the tail end of the campaign, however if a companies overall marketing activities don’t support its objectives and timing, the results are often poor, and the promotions manager gets to take the blame for the failure.

Choosing a good marketing company to integrate these complicated promotional channels is a task in itself since many will promise exceptional marketing campaign results yet few will deliver what you expect. When they fail, will you know where the problem was or will you have to chalk it up to experience and start all over again?

Why is it that many marketing firm’s promotional programs and implementation fail? Primarily because they don’t understand this fragmentation of media. Integrated marketing isn’t just a buzzword. Multi-channel marketing tactics need to be developed and coordinated by a campaign manager and carried out as a systematic program. Unfortunately, there is a shortage of skilled promotional marketing experts and a limited number of marketing companies that have a national network of marketing channel partners and contacts. Integrated marketing can’t be done well by small marketing companies that arrange deals with other independents. Large marketing companies have the resources, and the network of established channel partners that ensure your products are promoted from distribution to point of sale.

Marketing Promotion

Since marketing and advertising channels have become so fragmented, it is difficult for an advertiser to reach and affect a target consumer. Advertisers can no longer take access to consumers for granted and it takes a concerted effort to reach a consumer a number of different ways. Promotional marketing campaigns have to consider multiple mediums including the Internet to achieve optimal promotional and sales results. When they work together, they can register with the consumer audience, and ensure that your products are distributed to where they need to be at the right time.

We hear a lot about Internet marketing and its incredible reach, and it is excellent for communications and setting up brand awareness and purchase desire. However, for consumer goods companies, few promotional channels surpass retail store promotion. The retail store location is where the sale is made, and when your promotional program is focused to work well here, you’re likely to see things go well. A sale can be lost at the point of sale, much to the consternation of firms with weak connections and retail sales training programs. They’re unable to respond to sales rep issues and the demands of consumers, and when the consumer loses confidence or interest, they won’t commit to buying the product.

Sales transactions are complex and premiums and incentives are a key part of whether your product will make it to the store shelves and receive the right sales support. Once your products leave the warehouse, they’re on their own, unless a professional promotional marketing company is supporting them at the retail level.

Strong Integrated Channels

Marketing channels are complicated too, and if the connections in your network aren’t strong throughout, your sales can come to shuddering halt. Don’t think marketing channel members don’t know about your distribution vulnerabilities too. They know you’re an independent and they have their primary loyalties to bigger manufacturers and distributors. Your products may get secondary status and receive no sales support.

So what happens during fragmented promotional campaigns? Many marketing promotion campaigns are marred by poor point of sale signage, supplier communication blocks, unreliable reporting, warehouse fulfillment problems, poor sales support, poor sales training, along with high costs and outdated technology. A marketing promotion can fail many different ways and you need to understand why. When you’re spending hundreds of thousands of dollars on campaign development and distribution activities, and have committed to a particular marketing company, your company’s future is on the line.

What you need is a reliable marketing company that possesses the warehousing and database systems, fulfillment practices, and sales support network to ease distribution and communication problems.

If you’re still managing your marketing promotion campaigns in-house, you should consider outsourcing to a promotional advertising and marketing firm that offers a complete variety of support service. From campaign planning to post-sales customer support, these companies can take a burden off your hands and actually give you an edge in the retail promotions space.

Big promotional marketing companies have developed capabilities in producing creative and effective POS marketing materials, print advertising pieces, packaging, warehouse automation, and retail distribution. They can help you manage large scale orders on demanding deadlines because their state of the art electronic systems are set up to do this. They provide solutions for billing/invoicing, customized reporting, and warehouse distribution of your marketing collateral. From EDI transactions to Web-based reporting tools, they have a command of the marketing fulfillment process and can give you an excellent awareness of your marketing campaign performance. Just working with these companies once can make you a better marketing manager.

So give yourself a break and bring in the full service promotional consultants and then start seeing your marketing campaigns hit the mark. As part of a complete integrated, promotional marketing campaign, these service companies will save money, time, and reduce communication problems, and thus save your future marketing channel relationships.

The top promotional marketing firm in the US is without a doubt, Archway Marketing Services. This company has been serving marketers across the US for decades. Archway takes control of your complete promotional marketing campaign from start to finish. They provide excellent cost efficiencies in warehouse, inventory management and shipping. Their integrated ERP platform enables real-time supply management, reporting and customer care.

If you could double the ROI on your retail promotional marketing campaign, wouldn’t it make sense to bring in a full service promotional marketing company?

PVC Roofing

Roofing Website Hosting

By the way, if you’re looking for roofers in Dublin, check out Ace Roofing – they sponsor this blog!
Word Count: 420
420 1.9

PVC Roofing System

Roofs play a major role in providing protection for building structures, its occupants and interiors from outside elements. The strength and durability of the roof materials should therefore be given much attention since leakages and roof failures can be quite devastating both to your homes and businesses. It would be prudent to invest in durable roofing materials that you can expect to last for decades or so. The extra money you probably spend on superior quality roofing materials can probably save you a lot of trouble in the future.

PVC roof sheets are one of the greatest technological advancement in the roofing industry. A combination of durability and functionality, PVC roofing materials are utilized by both industrial and residential structures all over the world. In fact, most sporting stadium across the globe use PVC roofing materials, from the Wimbledon tennis courts in England to the ice sports hall on the Munich Olympic Ground. Modern architects choose PVC roofing system mainly because of its durability. Among the earliest noteworthy achievements of PVC roofing is the Stade de France in Paris. The 60,000 square meter roof was built to host the 1998 World Cup.

The PVC materials can withstand extreme weather conditions, from hail to thunderstorms to the hurricanes that seem to rack the nation on a regular basis. Your roof materials should be able to endure the wrath of nature to liberate yourself from constant worry.

The PVC roofing materials are also virtually fireproof. This is quite an important element to consider in safeguarding not only your belongings but also the lives of the residents of any structure for that matter. PVC roofing materials are also resistant to corrosion, making it practically maintenance free for a long time. The reflective surface of PVC membrane can help reduce a building’s cooling requirements. Such feature would only mean a lower cost for your energy consumption.

This roofing system is marginally cheaper than other roofing materials in the market today. The fact that it is also inexpensive and lightweight makes it all the more popular for outdoor use. PVC roofing sheets also has the distinction of having the longest track record in terms of usage. Hence, you can be assured that experts through the years have tested the quality and durability of PVC materials. Along with TPO or thermoplastic polyolefin, the roofing system have been labeled by the U.S. Environmental Protection Agency as roofing products that can reduce energy consumption and reduce problems associated with heat build-up, smog and air pollution.

How An Ultrasonic Humidifier Works

DIY Tips

Word Count:
680


Dry air is a common problem in cold weather and in warm climates. An ultrasonic humidifier can help solve the problems caused by dry air. These can be used in just about every room in your house, including the kitchen and bedroom. They shouldn’t be used in a bathroom, as the humidity level is generally higher in bathrooms. You can find these humidifiers in home improvement stores or on the internet.

Human beings are most comfortable when the humidity in the air is between …

Guest post today from Active Paving – providers of patios Dublin for many years.

ultrasonic humidifier, humidify, room humidifiers, air purifier,cleaner, kitchen,home improvement,

Dry air is a common problem in cold weather and in warm climates. An ultrasonic humidifier can help solve the problems caused by dry air. These can be used in just about every room in your house, including the kitchen and bedroom. They shouldn’t be used in a bathroom, as the humidity level is generally higher in bathrooms. You can find these humidifiers in home improvement stores or on the internet.

Human beings are most comfortable when the humidity in the air is between 30 and 50%. When the air is drier, you may notice symptoms such as a stuffy nose, sore throat, dry skin, dry hair, a dry cough, itchy eyes or nose bleeds. Low humidity causes problems in your home as well. Over time, dry air causes the wood in your hard wood floors and home furnishings to dry out. In extreme cases, it can become brittle and crack. Static electricity is another common problem with dry air.

Benefits of an Ultrasonic Humidifier

The water in these humidifiers isn’t heated. This is a good feature if the machine will be used in a child’s room. There is no danger of burns because there is no hot water. These humidifiers are very quiet when running, so your child’s sleep won’t be disrupted.

Ultrasonics don’t create the white dust that is common with warm mist humidifiers. This dust is the result of minerals in the water being released into the air. This dust settles on the furniture. Ultrasonic machines have a metal platform inside that catches this dust and keeps it from being released into the air.

How an Ultrasonic Humidifier Works

Ultrasonic humidifiers add moisture to the air using high frequency sound vibrations. These vibrations create an ultra fine mist in the air. A metal diaphragm inside the machine vibrates at a high frequency. This creates the mist. The size of this appliance is smaller and more compact than other humidifiers. This allows it to fit easily on any furniture.

Some helpful features on these machines include an adjustable setting for mist control. You can adjust these machines for more or less moisture in the air. Many have a built in humidistat to measure the level of moisture in the air. This helps you keep the humidity in the desirable level. If the level climbs too high, you can turn the mist down or off. You can purchase these separately, if your humidifier doesn’t come with one.

Using an Ultrasonic Humidifier Safely

The biggest concern with these humidifiers is the water is not heated. This poses a danger of microorganisms being released into the air. The presence of mold spores and bacteria in the air aggravates allergies or asthma and can cause illness. Fortunately there are some things you can do to help lessen this risk.

o Change the water in the humidifier after every use. Empty the container and rinse with fresh water. Use a towel to dry it out completely.

o Fill with fresh water just before every use. This prevents mold spores from growing in the standing water.

o Impurities in your tap water can find their way into the air, causing irritation. Both minerals and additives used to clean the public water supply, such as chlorine can cause irritation. The best way to avoid this is to use distilled or bottled water, or consider having a water purifier installed to clean all your water.

o Clean and disinfect the water chamber regularly. You will find instructions for this in your owner’s manual. Use a disinfectant to kill any microorganisms that may remain. Commercial humidifier cleaning products are sold in stores and on the internet for this purpose.

o High levels of humidity in the air lead to the growth of mold spores. Keep the level in the 30-50% range. A humidistat will help you monitor this. If your machine doesn’t have one, buy a separate one to be safe.

o A separate air filter, such as a hepa, can help remove any mold spores or contaminants from the air.

Marketing By Presupposition – The Curious Case Of Shan Zin Wah

Marketing With Funnels

Word Count:
508

If you want to find out what Clickfunnels is and how it works, click here!
If you sell or do something weird, or something that entails an awful lot of “information training” for potential customers, something that is very “niche” and little known to the general public, or something simply new that hasn’t had time to penetrate to the major markets as yet, you can sometimes feel that marketing is a real uphill battle.

I’ve certainly felt that way for many years but I’ve just started on a new campaign which I call “presupposition marketing”.

In …

article marketing, presupposition, pre-supposition, NLP, silvia hartmann

If you sell or do something weird, or something that entails an awful lot of “information training” for potential customers, something that is very “niche” and little known to the general public, or something simply new that hasn’t had time to penetrate to the major markets as yet, you can sometimes feel that marketing is a real uphill battle.

I’ve certainly felt that way for many years but I’ve just started on a new campaign which I call “presupposition marketing”.

In brief, I’m going to pre-suppose that the audience already knows what I’m talking about, even though I know they have no idea!

What that does is to engage interest and the “oops, why don’t I know this …” factor, which is a strong social motivator to find out more.

Let’s say we were trying to market a new product called Shan Zin Wah.

Most people will write articles such as, “What is Shan Zin Wah?”, “An Introduction to Shan Zin Wah”, “How Shan Zin Wah Can Help You Lose Weight”, “10 Good Reasons To Buy Shan Zin Wah” and so forth in order to try and educate the customer.

That’s fine and I’m not suggesting to stop writing those sort of articles; but it adds depth and a whole new range of topics you can write about when you simply pre-suppose that EVERYBODY already knows what Shan Zin Wah is, how good it is, how cool, and then go from THERE.

This opens up untold possibilities for intriguing Shan Zin Wah articles, such as:

“Beware of imitation Shan Zin Wah! Shan Zin Wah scams exposed!”

“The three biggest mistakes Shan Zin Wah users make every day …”

“Three Top Shan Zin Wah Tips for Experts Only!”

“Shan Zin Wah – Has It Stood The Test Of Time?”

“Shan Zin Wah VS Rock Salt – Who Will Win?”

As you read this, and read the five examples above again, something interesting happens – the presupposition that we are dealing with an established, well known product of some kind – and you’re the ONLY ONE WHO HAS MISSED OUT KNOWING ABOUT IT!

It’s intriguing, it’s interesting – and neurologically speaking, the whole concept of “Shan Zin Wah” gets filed with a completely different type of product than something that is being introduced as new, untried, untested, or that a person has to labouriously learn about first.

So and to sum up, what you do with your product or service is as follows.

Imagine that it is as well known as Coca Cola, Persil, Paris Hilton or Virgin MegaStores.

Now think of a range of articles that would be written if that was the case, and write them from that vantage point, to an informed, already convinced and aware audience, to give these people some EXTRA and INTERESTING further and background information about the product/service.

This is a really interesting and effective use of the NLP concept of “persuading by pre-supposition” and makes article writing into a much more fascinating challenge again, especially with a new produce or what would usually considered to be a “niche” product.

Poly Foam Roofing

Roofing Website Hosting

By the way, if you’re looking for roofers in Dublin, check out Ace Roofing – they sponsor this blog!
Word Count: 445
445×100= 1.1

Poly Foam Roofing

Having a roof made of poly foam material may not sound convincing to you. The truth is this poly foam roofing is popular only in hot climate region in the US like California. Homeowners living along the desert region will surely appreciate the benefits of poly foam roofing especially those that have flat roofs.

Polyurethane foam, a substance that is made of any polymer is the same substance that sealants, adhesives, and other synthetic-based materials are made of. Poly foam is not actually your main roofing material. It actually compliments the existing one regardless of type. Its main purpose is to insulate the substrate of roof so that heat is not trap. Poly foam is very expensive to install since in needs an expert to do the job, however there are companies, which specializes in poly foam roofing installation.

If you are bought to the idea, extra care is needed in contracting installer. Make sure that the contractor has a good standing reputation. Check for referrals if necessary. There are roofing contractors that offer a value-for-money poly foam installation. Make sure that it is adept at polyurethane foam roofing system. It has a proven track record, which is a must for roofing contractors. See to it that their personnel are well trained in this field, so you can trust them. You can be assured that what you have has high thermal resistance, seamless, lightweight and durable.

Poly foam is not difficult to maintain because it is so compact that makes it impossible for leakage. If there are any leaks, elastomeric coatings can be applied to the area to restore the material. Better still ask for advice from the company that installed your foam so that your foam will be treated carefully. Ask also if maintenance is part of the package, in that case you can save more.

The only drawback of this is when the foam is left exposed to the sun. The heat of the sun dries up the foam making it disintegrate into pieces. Before this happens, a good amount of coating is necessary to protect the foam from drying up. The pros recommend acrylic latex coating because it is affordable and easy to apply, besides it can be availed off the rack from your nearest shops.

If you must invest in foam roofing, you can ask actual experiences from the people you know in your area. You can gather more suggestion if it is worth spending and have better options. There is nothing like being careful in spending your money on foam roofing, after all a good investment in poly foam roofing is a good protection of your home.